How hard is it to change the heater plugs in my 2.8 and how long about to do the job ? Ive had trouble lattly starting me jeep in the morning due to the cold weather is it my plugs
« Last Edit: November 13, 2007, 08:11:55 PM by alan1971 »
You need to disconnect the battery - then the glow plug rail than loosen off the rail from the plugs.
Then one at a time gently unscrew the plugs - a deep socket set is handy for this. Trick as mentioned is not to snap or breal the plugs when pulling them out - also be careful not to smack the carbon tips as they come out of the whole.
Revers procedure for fitting new ones and off you go...
its worth giving the raila good clean while you're at it too.