Re: mk2 front wheel bearings adjustment

[TinyTim]

I don't have any information that recent but I doubt they changed it very much

Not a difficult job to do and if your wheel bearing lock ring is the same you can even hire the correct tool from the club so no bashing screwdrivers.

Haynes do a manual that will help you http://www.haynes.co.uk/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10001&storeId=10001&productId=37805&langId=-1

[drewwalker]

what size is the nut on the hub is it 3/4 or what Iam ging t try thus my self

[Sparks]

As for them 2 small phillips screws....... The heads are constantly chewed as they are made from cheese...........

Hi

If you have some that are not yet chewed, remember they are PHILLIPS, not POZI. Trying them with pozi screwdrivers will chew them up. You need old fashioned phillips screwdrivers and you have to use the correct size! As stated elsewhere, it also helps to use impact to shock it free!
Mine have been in and out several times over the last few months, not chewed yet!

sparks